M26E4 Pershings Trumpeter 1/72nd – Project ’46 and SABOT Tank vrs Tank gaming wip3

Trumpeter Pershings ….

And the Pershings are now at the same stage as the Easy8 Shermans, basic assembly is complete and now it’s replacing the solid moulded on lift rings and adding most of the details, leaving the final fragile stuff to be added after painting.

I’m also contemplating making a few improvements to the pilot model vehicles, a couple easy, a couple not so. Firstly the pilot models had thinner fenders, cut back to the width of the stowage boxes, easy to do. They also didn’t have the pistol port fitted on the left hand turret side, again easy enough to sand off.

One of the harder things to change is that the turret used had the split loaders hatch. As I don’t have any spares in the stash box I probably wont be able to change those. And the pilot model used the standard shorter turret and had a temporary stack of weights strapped mounted at the back to counterbalance the heavier gun weight and help turret rotation. This requires cutting off the production extended bustle and a fair bit of filling and faffing. If I had split loaders hatches it probably would be worth it but at present they will likely stay as is ….

Q

tr t26e4 -050 1500

tr t26e4 -055 1400

Advertisements

2 comments on “M26E4 Pershings Trumpeter 1/72nd – Project ’46 and SABOT Tank vrs Tank gaming wip3

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s